Looking for a High imitation Rolex GMT-Master II? This classic style Root Beer Bezel is perfect!

Time:2024-12-30 Author:ldsf125303

Alright, so I’ve been messing around with watches lately, and I got this idea to try and make a Rolex GMT-Master II that looks like the real deal – you know, the “Root Beer” one with that classic two-tone bezel. It’s a pretty slick watch, but way out of my price range, so I figured, why not try to make one myself? It sounded like a fun project, and I thought I’d share how it went.

First off, I needed to find a watch that I could use as a base. I didn’t want to spend too much, so I looked for something that was kind of like the Rolex GMT-Master II but way cheaper. I ended up finding a decent-looking watch that had a similar shape and a rotating bezel. It wasn’t perfect, but it was good enough to start with.

  • Finding the Right Parts: This was a bit of a scavenger hunt. I needed a bezel insert that looked like the “Root Beer” one – that brown and black combo. I also wanted some new hands that matched the Rolex style, with that little circle on the hour hand. I searched around online, found some parts that looked promising, and ordered them.
  • Taking the Watch Apart: Okay, this was the scary part. I’d never really taken a watch apart before. I got some tiny screwdrivers and just carefully started unscrewing things. I made sure to keep track of all the little screws and parts so I wouldn’t lose anything. I managed to get the old bezel off and the hands removed without breaking anything, which was a relief.
  • Putting on the New Bezel: This was a bit tricky. The new bezel insert was just a thin piece of metal, and I had to carefully line it up and press it into place. I used a little bit of glue to make sure it stayed put. It wasn’t a perfect fit, but it looked pretty darn close to the real “Root Beer” bezel.
  • Replacing the Hands: This was probably the hardest part. The watch hands are super tiny, and you need to use special tools to press them onto the little posts. I messed up a couple of times and almost bent the hands, but I finally got them on straight.
  • Putting it all Back Together: Once I had the new bezel and hands on, it was just a matter of putting the watch back together. I carefully screwed everything back in place, making sure not to overtighten anything.

The Final Result

So, after all that work, how did it turn out? Well, it’s not a perfect replica, of course. But honestly, it looks pretty good! The “Root Beer” bezel really makes it pop, and the new hands give it that classic Rolex vibe. I’m pretty happy with how it turned out, especially considering it cost me way less than a real Rolex. It’s not something I’d wear every day, but it’s a fun piece to have in my collection. And hey, it was a cool learning experience. I definitely have a new appreciation for how much work goes into making these things. Would I do it again? Maybe! It was a fun challenge, and I learned a lot along the way.